海淘晒单/汇报
代购 转让 交易
论坛版务/闲聊灌水
安全提问(未设置请忽略)
母亲的名字
爷爷的名字
父亲出生的城市
您其中一位老师的名字
您个人计算机的型号
您最喜欢的餐馆名称
驾驶执照最后四位数字
小白又来了，关于亚马逊添加借记卡显示出了discover通道的问题。。
查看: 5251|回复: 15
该用户从未签到
添加62银联借记卡右边显示出了discover通道标志
麻烦问下借记卡的持卡人签名和有效日期怎么填写。。
貌似借记卡没有这吧
该用户从未签到
不能用借记卡付款
TA的每日心情好喜欢好想买 08:59
写你自己名字的拼音。至于过期日期，因为银联卡大部分没有过期日期，所以你只要选择一个未来的某个时间就可以了。
该用户从未签到
yes191466 发表于
不能用借记卡付款
可以关联绑定，为什么不能付款呢。。
本地三线城市银行不给个体户办信用卡
要存10W的定期才行
这个discover通道是我唯一的希望了
该用户从未签到
adamslam 发表于
写你自己名字的拼音。至于过期日期，因为银联卡大部分没有过期日期，所以你只要选择一个未来的某个时间就可 ...
办不了信用卡。好无赖啊。o(︶︿︶)o 唉
该用户从未签到
amazon就别费劲了，代刷省事，汇率还低。。
TA的每日心情好喜欢好想买 16:31
成功了开个教程贴 会火哦、
该用户从未签到
ascola 发表于
amazon就别费劲了，代刷省事，汇率还低。。
呵呵，还是觉得要自己学会海淘，毕竟如果以后买东西次数会多
该用户从未签到
習慣ゾ想伱丶y 发表于
呵呵，还是觉得要自己学会海淘，毕竟如果以后买东西次数会多
那就需要有信用卡啊。。
该用户从未签到
習慣ゾ想伱丶y 发表于
可以关联绑定，为什么不能付款呢。。
本地三线城市银行不给个体户办信用卡
要存10W的定期才行
discover通道的是单币银联信用卡，不是借记卡。你都没有效期和cvv，你让网站怎么确认？哪来的安全性？
该用户从未签到
而且你输完卡号它就会自动识别是什么卡类型的，你随便输个卡号，如果有这卡号它也会显示的。
该用户从未签到
信用卡可以网上申请的，谁让你跑柜台申请了。
该用户从未签到
yes191466 发表于
信用卡可以网上申请的，谁让你跑柜台申请了。
三线城市，只有建行和工行有网申。工行20天还是审核，建行被拒2次
TA的每日心情不是吧 又被税 13:27
唉。LZ咱俩同命相连阿...
该用户从未签到
现在还有不能办信用卡的？都是银行主动上门办理啊！
menu.innerHTML = ''+upload_form+'' + str + '提交取消';
menu.innerHTML = '' + str + '提交取消';
showMenu({'ctrlid':ctrlid,'evt':'click','duration':3,'cache':0,'drag':1});
function seditor_insertunit(key, text, textend, moveend, selappend) {
if($(key + 'message')) {
$(key + 'message').focus();
textend = isUndefined(textend) ? '' :
moveend = isUndefined(textend) ? 0 :
selappend = isUndefined(selappend) ? 1 :
startlen = strlen(text);
endlen = strlen(textend);
if(!isUndefined($(key + 'message').selectionStart)) {
if(selappend) {
var opn = $(key + 'message').selectionStart + 0;
if(textend != '') {
text = text + $(key + 'message').value.substring($(key + 'message').selectionStart, $(key + 'message').selectionEnd) +
$(key + 'message').value = $(key + 'message').value.substr(0, $(key + 'message').selectionStart) + text + $(key + 'message').value.substr($(key + 'message').selectionEnd);
if(!moveend) {
$(key + 'message').selectionStart = opn + strlen(text) -
$(key + 'message').selectionEnd = opn + strlen(text) -
text = text +
$(key + 'message').value = $(key + 'message').value.substr(0, $(key + 'message').selectionStart) + text + $(key + 'message').value.substr($(key + 'message').selectionEnd);
} else if(document.selection && document.selection.createRange) {
var sel = document.selection.createRange();
if(!sel.text.length && $(key + 'message').sel) {
sel = $(key + 'message').
$(key + 'message').sel =
if(selappend) {
if(textend != '') {
text = text + sel.text +
sel.text = text.replace(/\r?\n/g, '\r\n');
if(!moveend) {
sel.moveStart('character', -endlen);
sel.moveEnd('character', -endlen);
sel.select();
sel.text = text +
$(key + 'message').value +=
hideMenu(2);
if(BROWSER.ie) {
function dm_editor_squarestrip(str) {
str = str.replace('[', '%5B');
str = str.replace(']', '%5D');
function dm_ajaxpost(formid, showid, waitid, showidclass, submitbtn, recall) {
var waitid = typeof waitid == 'undefined' || waitid === null ? showid : (waitid !== '' ? waitid : '');
var showidclass = !showidclass ? '' :
var ajaxframeid = 'ajaxframe';
var ajaxframe = $(ajaxframeid);
var curform = $(formid);
var formtarget = curform.
var handleResult = function() {
var s = '';
var evaled =
showloading('none');
s = jQuery("#"+ajaxframeid).contents().find("body").first().html();
} catch(e) {
s = '内部错误 无法显示';
if(parseInt(s) > 0) {
// 上传成功
var attachnew = '';
if(jQuery("#fwin_reply").length > 0){
jQuery("#postform").append(attachnew);
seditor_insertunit("post", '[attachimg]' + s, '[/attachimg]', null, 1);
}else if(jQuery("#fwin_newthread").length > 0){
jQuery("#postform").append(attachnew);
seditor_insertunit("post", '[attachimg]' + s, '[/attachimg]', null, 1);
jQuery("#fastpostform").append(attachnew);
seditor_insertunit("fastpost", '[attachimg]' + s, '[/attachimg]', null, 1);
hideMenu();
s = dm_lang[0];
} else if (parseInt(s) < 0) {
var n = Math.abs(parseInt(s));
s = dm_lang[n];
if(showidclass) {
if(showidclass != 'onerror') {
$(showid).className =
showError(s);
if(submitbtn) {
submitbtn.disabled =
if(!evaled) {
ajaxinnerhtml($(showid), s);
if(curform) curform.target =
if(typeof recall == 'function') {
eval(recall);
if(!evaled) evalscript(s);
ajaxframe.loading = 0;
if(!BROWSER.firefox || BROWSER.safari) {
$('append_parent').removeChild(ajaxframe.parentNode);
setTimeout(
function(){
$('append_parent').removeChild(ajaxframe.parentNode);
if(!ajaxframe) {
var div = document.createElement('div');
div.style.display = 'none';
div.innerHTML = '';
$('append_parent').appendChild(div);
ajaxframe = $(ajaxframeid);
} else if(ajaxframe.loading) {
_attachEvent(ajaxframe, 'load', handleResult);
showloading();
curform.target =
var action = curform.getAttribute('action');
action = hostconvert(action);
curform.action = action.replace(/\&inajax\=1/g, '')+'&inajax=1';
curform.submit();
if(submitbtn) {
submitbtn.disabled =
您需要登录后才可以回帖
回帖后跳转到最后一页
Powered by
14:46, Processed in 0.144912 second(s)
&&京公网安备64号
新月亮网络科技（北京）有限公司 版权所有地址：北京市蓝靛厂东路金源商务中心B区2号1709&&&电话：010-播放列表加载中...
正在载入...
分享视频：
嵌入代码：
拍下二维码，随时随地看视频
忍者勇士开播七季以来终于有人完成了全部关卡并赢得...
上 传 者：
内容介绍：
忍者勇士开播七季以来终于有人完成了全部关卡并赢得了一百万美元奖金
Channel Me 精选
我来说点啥
版权所有 CopyRight
| 京网文[0号 |
| 京公网安备：
互联网药品信息服务资格证：（京）-非经营性- | 广播电视节目制作经营许可证：（京）字第403号
<img src="" width="34" height="34"/>
<img src=""/>
<li data-vid="">
<img src=""/><i data-vid="" class="ckl_plays">
<img width="132" height="99" src=""/>
在线人数：
<li data-vid="">
<img src=""/><i data-vid="" class="ckl_plays">
<img src="///img/blank.png" data-src=""/>
<img src="///img/blank.png" data-src="http://"/>
<li data-vid="" class="cfix">
src="///img/blank.png" data-src=""/>
<i data-vid="" class="ckl_plays">
<li data-vid="" class="cfix">
src="///img/blank.png" data-src=""/><i data-vid="" class="ckl_plays">
没有数据！
{upload_level_name}
粉丝 {fans_count}
{video_count}
{description}&& 查看话题
【求助】关于MS Discover 报错的原因？
1.NOTE: Pressure and energy tail corrections will be added to all subsequent energy evaluations
2.Error: Miscellaneous: Error encountered in routine analysis_main:
第一个是错误吗？会不会影响MSD 和RDF的计算？
第二个报错了，是哪里出了问题？
3.overflow 了，什么原因呢？
是不是有溢出啊？
4.Animation error: Cannot operate upon infinite SymmetrySystem.
是什么错了呢？
5.Animation error: 找不到元素
哈哈，不知道改的对不对
关于你的第四个错误，我想应该是你构建了超晶胞之后没有建立真空层，要在三维周期条件下才可以计算 Originally posted by lianglinlin at
关于你的第四个错误，我想应该是你构建了超晶胞之后没有建立真空层，要在三维周期条件下才可以计算 怎么建立真空层呢？我就是在一个空的晶报中放入一个PNT,然后跑动力学的， Originally posted by 5858797 at
1.NOTE: Pressure and energy tail corrections will be added to all subsequent energy evaluations
2.Error: Miscellaneous: Error encountered in routine analysis_main:
第一个是错误吗？会不会影响MSD ... Overflow问题表示计算过程中临时数据存储空间不足引起的，你在计算的过程中采用的是Fluctuation模式，而不是Static模式，Discover提供了两种Mechanical Properties calculation modes，Static和Dynamical。前者计算过程中只需要部分Configurations的原子坐标和晶格常数，二后者计算包含了 Trajectory文件中各个Configs坐标文件，因此如果采用Fluctuation模式坐标文件会很大，这些数据必须要存储起来以便后面的计算用。在这个过程中就存在Overflow问题。下面的文字写的很清楚：
“The input data required by the static and dynamic methods consist of sets of coordinates of one or more configurations stored in archive (.arc) or history (.his) files.
In contrast, the input data required by the fluctuation formula option consist of cell parameters and stresses associated with frames in a trajectory. This information is always contained in history files and can also be saved in .tbl files using the Discover print table output option during dynamics. There is currently no way to generate .tbl files from the GUI. This must be done by adding BTCL commands to the .inp file for Discover. When many frames must be analyzed (say ), the table file option is usually the only practical choice, since the resulting files are significantly more compact than history files (which will contain unwanted coordinate, velocity, and other information for all atoms). Table files should be set up to record instantaneous values (see Types of structures analyzed for further details).“
计算Elastic Constants过程如下，在Discover中采用了13个优化步骤，1个优化步骤是初始静态结构优化，其余12个优化是弹性常数计算，包含了3个 Tensor Stress和3个SHear Stress，初始优化计算一般是1000次，后续的应变晶胞优化采用了拉伸和压缩两种模式，幅度位0.005之间。如果是Static 计算，一般认为材料是各向同性假设。
Elastic Properties (static) for 1 frameIf only a single frame is analyzed, the .out file contains the matrix of coefficients (in GPa), plus a summary of the Poisson's ratio and the various moduli (Young's, bulk, shear, and the two Lamé constants) calculated assuming the material to be isotropic.
Elastic Properties (static) for 2 or more framesIf more than a single configuration has been analyzed, the .out file contains averages and standard deviations for all the elastic constants. The output produced by the program will also include a .tbl file containing histograms of the moduli, plus a table specifying elastic constants for each frame analyzed.
If you wish to see the matrix coefficients for each frame, you will need to view the .tbl file with a text editor. The file consists of a header section which describes the columns of the following data section. The matrix coefficients can be found in columns 9 through 21. Column 9 gives the frame number and the subsequent columns are C11,C22,C33,C12, C21,C13,C31,C23,C32,C44,C55 and C66.
If you wish to see the matrix coefficients for each frame, you will need to view the .tbl file with a text editor. The file consists of a header section which describes the columns of the following data section. The matrix coefficients can be found in columns 9 through 21. Column 9 gives the frame number and the subsequent columns are C11,C22,C33,C12, C21,C13,C31,C23,C32,C44,C55 and C66.
For each configuration submitted for elastic constants calculation by the fluctuation approach, both Eq. 126 and Eq. 127 are applied to obtain stiffness coefficients using the strain-strain and stress-strain correlation methods, respectively. The .out file is similar to that produced by the static method above, except that it contains two sets of st one for each fluctuation formula. In addition, the various moduli computed assuming the material to be isotropic are again provided. Finally, in this case, relevant quantities which need to be examined graphically are those pertinent to convergence of each fluctuation formula. Consequently, the .tbl file generated by the analysis contains running averages of the appropriate quantities
in the fluctuation formulas.
For each configuration submitted for analysis using the molecular dynamics method of estimating mechanical properties, a total of three loading experiments are performed, in which a uniaxial tensile stress is applied stepwise along the x, y, or z directions. For each loading direction, constant stress dynamics is performed as a series of up to 10 stages, each of duration 1 ps. At the end of each stage, values of the internal stress tensor and of the strain tensor are recorded. Before continuing on to the next stage, the applied (external) stress is incremented by a predefined amount (0.05 GPa, or 500 bar). An experiment for any given pulling direction stops when the strain in that direction exceeds 0.2, or when all 10 stages have been completed, whichever occurs first. When all three loading experiments are completed, the recorded stress-strain data are averaged for all three directions.
The Young's modulus and Poisson's ratio are computed using a least-squares fit to the averaged tensile stress vs. tensile strain, and to the (negative) average lateral strain vs. tensile strain. The .out file contains a summary of the average Young's modulus and Poisson's ratio, plus values of the bulk and shear moduli derived therefrom according to Eq. 122 through Eq. 125. In addition, a .tbl file is produced containing the averaged stress/strain and lateral strain/tensile strain plots. If more than a single configuration has been analyzed, the output represents averages over the logical trajectory, in addition to averages over loading directions.
Finally, it should be noted that if the structure analyzed according to the molecular dynamics approach was originally obtained from an .arc or .car file, then the results refer to a temperature of 298 K. Otherwise (for example, if the structure was obtained from a .his file), the results refer to the same temperature as the simulation that generated the .his file.
总之Overfolw是动态存储不足引起的，实际上既然overflow了，那么Trajectory的坐标文件都没有保存，整个计算就是失败了，因此输出结果是0是正常的。计算结果不可靠是势函数问题。详细的你可以看看Discover Help files，里面又更加明确的解释！
具体贴：http://202.117.30.253/bbs/viewthread.php?tid=384&extra=page%3D1 :tiger05::tiger28: Originally posted by 5858797 at
1.NOTE: Pressure and energy tail corrections will be added to all subsequent energy evaluations
2.Error: Miscellaneous: Error encountered in routine analysis_main:
第一个是错误吗？会不会影响MSD ... 已解决 : Originally posted by 5858797 at
已解决... 请问第一个错误时如何解决的？:hand: